Installation
3-1
Part 107016-02
E
2016 Nordson Corporation
Section 3
Installation
WARNING:
Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Gun Mounting
1. See Figure 3-1. Install the mounting bar clamp (1) on a 25.4-mm (1-in.)
diameter bar (2). Tighten handle B.
2. Loosen the set screws (5) in the gun mount (4) and insert the end of the
mounting bar (3) in the mount. Tighten the set screws securely.
3. Use knob A to adjust the angle of the spray gun. Use handle B to
position the clamp (1) vertically or horizontally. Use handle C to adjust
the angle and length of the mounting bar.
1400410B
3
5
B
C
2
A
1
4
5
6
7
Figure 3-1
Gun Mounting—Shur-Lok Gun Mount
1. Mounting bar clamp
2. 25.4-mm (1-in.) bar
3. Mounting bar
4. Shur-Lok gun mount
5. Set screws
6. Hose bracket
7. Hose adapter
Note:
Refer to
Gun Mounting Bar
in the
Options
section for ordering information about the mounting bar (3).
Summary of Contents for Versa-Spray II
