Nordson Encore HD iControl 2, Installation, Troubleshooting, Repair

Page: 56 / 114

© 2022 Nordson Corporation
1609758-04
4-6 Troubleshooting
Code Message Text Description
Refer to
Page
100x, 110x Positioner
1001 E-Stop OPEN The E-Stop circuit is open. page 4-16
1002 Encoder failure
The encoder is not responding when motion is commanded or
is responding with defective signals.
page 4-16
1003 Motor Protector The motor protector is open. page 4-17
1004 Motion Controller The motion controller indicates a failure. page 4-17
1005 Forward Contactor The forward contactor did not engage. page 4-17
1006 Reverse Contactor The reverse contactor did not engage. page 4-17
1007 Forward End of Travel Limit The machine is at the forward end of travel limit. page 4-18
1008 Reverse End of Travel Limit The machine is at the reverse end of travel limit. page 4-18
1112
Positioner not in ready state
for Color Change
The positioner has not reached the proper location for color
change.
page 4-18
200x, 210x Reciprocator
2001 E-Stop Open The E-Stop circuit is open. page 4-23
2002 Encoder failure
The encoder is not responding when motion is commanded or
is responding with defective signals.
page 4-23
2003 Motor Protector The motor protector is open. page 4-24
2004 Motion Controller The motion controller indicates a failure. page 4-24
2005 Forward Contactor The forward contactor did not engage. page 4-24
2006 Reverse Contactor The reverse contactor did not engage. page 4-24
2007 Forward End of Travel Limit The machine is at the forward end of travel limit. page 4-25
2008 Reverse End of Travel Limit The machine is at the reverse end of travel limit. page 4-25
2101 Part size less than minimum The part detected is too small. The reciprocator will attempt to
stroke at the minimum length.
page 4-25
2102
Lead spray gun not defined
− using spray gun 1
The lead spray gun on the reciprocator is not defined. page 4-25
2103
Trail spray gun not defined −
using spray gun 1
The trailing spray gun on the reciprocator is not defined. page 4-25
2104
Trail spray gun less than
lead − trail = lead
The trailing spray gun number is less than the lead spray gun
number.
page 4-25
2105
Pattern width not set − using
12 inches (305 mm)
The pattern width has not been set using default. page 4-25
2106
Vertical scanner not
configured − recip mode 1
invalid
A vertical scanner is required for variable stroke operation. page 4-25
2107
Speed calculated less than
minimum
The speed of the reciprocator is less than the minimum value
allowed.
page 4-26
Continued...