Nordson Encore HD iControl 2, Installation, Troubleshooting, Repair

Page: 16 / 114

© 2022 Nordson Corporation
1609758-04
2-4 Overview
Operator Interface
The operator performs all configuration and operation tasks with the touch screen and
iControl 2 software. The software provides the operator a graphical user interface for
system configuration, operation, and troubleshooting.
2
1
3
Figure 2-3 Main Console and Pedestal Front Panels
1. Interlock keyswitch 2. LCD touch screen 3. Power switch
NOTE: The operator interface software and operating system should be completely shut down before turning off
console power.
Interlock Keyswitch Functions
In the Ready position, the spray guns cannot be triggered unless the conveyor is running.
This prevents powder waste and hazardous operating situations.
In the
Bypass position, spray guns can be triggered on and off without running the
conveyor. Use the Bypass position to set up and test spray gun settings.
In the
Lockout position, the spray guns cannot be triggered and the in/out positioners
and reciprocators cannot be moved. Use this position when working inside the booth.
The lockout can be overridden for the in/out positioners and reciprocators from their
configuration screens.