Nordson Encore HD iControl 2, Installation, Troubleshooting, Repair

Page: 27 / 114

© 2022 Nordson Corporation
1609758-04
3-3 Installation
Interconnect Cables
Refer to the Parts section for cable part numbers.
Table 3-1 System Interconnect Cables
Cable Function
PD1 Discrete signals for zones 1−8, part ID 1−8, trigger banks 1 and 2, trigger select, conveyor encoder A,
plus +24Vdc to power the scanner controllers or photocells.
PM1 Ethernet signals for spray gun mover control and for powder feed center color change sequence.
PM2 Ethernet signals from analog scanners for spray gun mover control.
PJ1 Signals between pedestal and console:
• +12 and +24V to pedestal
• Conveyor run
• Remote lockout
• Spray Gun power OK
• Keyswitch lockout
• Keyswitch bypass
• Remote manual enable
• Alarm
PJ2 CAN network and lockout signals between pedestal and console.
CA1 AC power from the system electrical panel.
CB1 CAN network to pump panels.
PC1 Optional connection for remote signals for the following functions:
• Manual enable
• Remote lockout
• Alarm relay