Nordson Compact Manual Iso-Flo Voltage-Block, Manual

Page: 39 / 76

Installation
3-7
E 1996 Nordson Corporation
All rights reserved
108 390B
Issued 7/96
Manual 10-10
Mount the atomizing air regulator outside the cabinet if it is too large to fit
inside. See Figure 3-3 and follow these steps:
1. Connect a grounded air hose (6) to the
1
/
4
-in. NPT x
1
/
4
-in. NPSM
fitting (2) on the flow sensor (3). Route the hose through the fluid
outlet hole in the cabinet to the regulator inlet.
2. Connect another grounded air hose (6) between the regulator outlet
and spray device air inlet.
3. Connect a ground strap or wire (5) between the
1
/
4
in. NPT x
1
/
4
in.
NPSM hose fitting (2) and the cabinet air inlet fitting.
WARNING: Risk of electrical shock. Failure to connect a
ground strap may result in personal injury, death, or equipment
damage. Check for continuity between the spray device handle
and the ground.
Installing Regulator Outside
Cabinet