Nordson Compact Manual Iso-Flo Voltage-Block, Manual

Page: 9 / 76

Safety
1-3
E 1995 Nordson Corporation
All rights reserved
Issued 11/95 A1EN − 03 − [SF − LIQD] − 1
CAUTION: Failure to observe may result in equipment
damage.
CAUTION: Hot surface. Failure to observe may result in
burns.
“Qualified personnel” is defined here as individuals who thoroughly
understand the equipment and its safe operation, maintenance, and
repair. Qualified personnel are physically capable of performing the
required tasks, familiar with all relevant safety rules and regulations, and
have been trained to safely install, operate, maintain, and repair the
equipment. It is the responsibility of the company operating this
equipment to see that its personnel meet these requirements.
WARNING: Use of this equipment in ways other than
described in this manual may result in personal injury, death, or
property and equipment damage. Use this equipment only as
described in this manual.
Nordson Corporation cannot be responsible for injuries or damages
resulting from nonstandard, unintended applications of its equipment.
This equipment is designed and intended only for the purpose described
in this manual. Uses not described in this manual are considered
unintended uses and may result in serious personal injury, death, or
property damage. Unintended uses may result from taking the following
actions:
S
making changes to equipment that have not been recommended or
described in this manual or using parts that are not genuine Nordson
replacement parts
S
failing to make sure that auxiliary equipment complies with approval
agency requirements, local codes, and all applicable safety standards
S
using materials or auxiliary equipment that are inappropriate or
incompatible with your Nordson equipment
S
allowing unqualified personnel to perform any task
2. Safety Symbols
(contd.)
3. Qualified Personnel
4. Intended Use