Nordson Compact Manual Iso-Flo Voltage-Block, Manual

Page: 18 / 76

Safety
1-12
E 1995 Nordson Corporation
All rights reserved
Issued 11/95
A1EN − 03 − [SF − LIQD] − 1
S
See Table 1-1. Check the labels on your solvent containers.
Halogenated hydrocarbon solvents can be recognized if any of the
following elements are listed in the name of the product or as an
ingredient:
Element Symbol Prefix
Flourine F “Flouro-”
Chlorine Cl “Chloro-”
Bromine Br “Bromo-”
Iodine I “Iodo-”
If you are now using halogenated hydrocarbon solvents in pressurized
systems with aluminum components, perform the following steps:
S
Pump the system empty, shut off the pumps, and relieve the system
pressure.
S
Disassemble and inspect the system components. Replace any
damaged or corroded parts.
S
Thoroughly clean all noncorroded parts with nonhalogenated
hydrocarbon.
S
Contact your coatings, solvent, or adhesive supplier for a
nonhalogenated solvent to thoroughly flush the entire system before
operating it.
S
If you must continue to use halogenated hydrocarbon solvents,
consult your Nordson representative about compatible Nordson
components.
10. Material and Solvent
Precautions
(contd.)