manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Operating Manual

Share
Download
Nordson EFD 2+2-XCH-V3 Operating Manual Download Page 82

PROFIBUS Communicator Replacement Parts

Part #

Description

7830499

Cable, power, PROFIBUS communicator, 24V, 2.0 m (PROFIBUS communicator power supply 
cable)

7029237

Cable, PICO controller / PROFIBUS communicator, 0.5 m (cable that connects the 
PICO controller to a PROFIBUS communicator)

7029246

PROFIBUS communicator

PROFIBUS Communicator Troubleshooting

The PICO controller acts like a PROFIBUS slave on the PLC side. A comprehensive diagnosis of field devices is 
possible via PLC Management. This diagnosis should also be used primarily when searching for errors on the side of 
the fieldbus. Refer to “Troubleshooting” on page 50 for complete troubleshooting information.

Problem

Possible Cause

Corrective Action

PLC: No parameterization on the part of PLC is possible

No response to a request

PLC/Fieldbus configuration
 Communicator configuration damaged
CAN cable not connected
CAN termination incorrect

 Use the diagnostic functions of the PLC
Check the CAN cable connection
Check the CAN cable termination
 Allow the PROFIBUS communicator to 
check or allow it to reconfigure

Controller Error

Local handling at the PICO 
controller not possible 
(Lock symbol present on 
the display)

Local service blocked by the PLC; flag 
set “LocalService = false”

Send a request with “Local Service = true” 
to the PICO controller, or unplug the CAN 
cable and wait for the LS timeout time.

Lock symbol disappears: 
Local Service switches to 
True without configuration 
message

LS timeout expired and automatically 
unblocked local service

Under the CAN System Data menu option, 
set LS Timeout to a value that is greater 
than the configuration message interval, or 
set 0 (i.e., LS timeout is shut off).

PROFIBUS Communicator Part Numbers

Part #

Description

7029239

Kit, PROFIBUS Communicator, PICO Controller 2+2-XCH-V3, 2 channel

7029243

Kit, PROFIBUS Communicator, PICO Controller 2+2-XCH-V3, 4 channle

PICO Controller 2+2-XCH-V3

82

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Summary of Contents for 2+2-XCH-V3





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands