Nordson EFD 2+2-XCH-V3 Operating Manual Download Page 75

Page: 75 / 84

• The function blocks for communication in higher layers (FB19, FB20) do not offer universal collection on all

necessary drivers for higher layers in the protocol.

•  With FB19, it is possible to write values for a complete line.
•  FB20 can be used to write/read a value.
•  For other configuration scenarios, function blocks FB19 and FB20 must be appropriately adapted, modified, or

even rewritten.

• Existing blocks FB19/FB20 are intended to explain the configuration of the PICO controller, but low-level drivers

FB15 and FB16 can be used universally and can be used unchanged for other configuration tasks.

Important Information About PLC Blocks

Using FB20 to Write a Parameter

The writing of a pulse time of 0.3 ms in line 1/channel 1 is displayed in the VarTab:

PICO Controller 2+2-XCH-V3

www.nordsonefd.com [email protected]

+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.

Summary of Contents for 2+2-XCH-V3





















































































Search results

Summary of Contents for 2+2-XCH-V3

Reviews:

Brands by name

Popular brands

Nordson EFD 2+2-XCH-V3, Operating Manual

Search results

Summary of Contents for 2+2-XCH-V3

Reviews:

Brands by name

Popular brands