manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Operating Manual

Share
Download
Nordson EFD 2+2-XCH-V3 Operating Manual Download Page 12

Installation

Unpack and Inspect

After unpacking the equipment, check that the scope of delivery is complete and that your operating conditions 
comply with the information on the rating plate. The scope of delivery includes:

•  One PICO controller V3
•  One SD memory card with files
•  One 2 m PICO controller power supply cable (P/N 7027455)
•  One “PICO Controller V3 Operating Manual” on CD-ROM

Make the System Connections

Prior to conducting work on the system, ensure that running processes will not be interrupted. If necessary, turn off 
the system. Only qualified and trained personnel may perform work on the system.

CAUTION

1.  Turn off devices/systems/processes to avoid interrupting running processes.

2.  Refer to the PICO 

Toµch

 controller operating manual to connect the valve(s) to the PICO 

Toµch

 controller.

3.  Create a hardwire connection between the PICO controller and the PICO 

Toµch

 controller (Y-connection 

cable, P/Ns 7028222 and 7012975). Refer to “Connector Pin Assignments and Signal Levels” on page 13 for 
connection details.

4.  (Optional) Establish the fieldbus connection using the CAN cable. Refer to “Connector Pin Assignments and 

Signal Levels” on page 13 for connection details.

5.  Establish the power supplies to the PICO controller (cable P/N 7027455) and the PICO 

Toµch

 controller (refer to 

the PICO 

Toµch

 controller operating manual if needed).

PICO Controller 2+2-XCH-V3

12

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Summary of Contents for 2+2-XCH-V3





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands