manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Operating Manual

Share
Download
Nordson EFD 2+2-XCH-V3 Operating Manual Download Page 16

Design and Interfaces

Setup

The PICO controller has the interfaces shown in the diagram above. Optional Channels 3 and 4 can be added later 
with a plug-in card. When controlling with the PLC, it is advisable to supply the binary communication signals with 
the external PLC operating voltage galvanically isolated from the PICO controller (refer to the circuit diagrams under 
“Technical Data” on page 52).
The PICO controller works on the basis of a microprocessor. Parameters are set using an ASCII TXT file and 
SD card or by using the fieldbus communication interface. Parameters can also be adjusted locally on the PICO 
controller (within set limits ) by using the Menu dial and the Enter and ESC (escape) keys on the front of the unit. The 
display shows the current values.

PICO Controller 2+2-XCH-V3

16

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Summary of Contents for 2+2-XCH-V3





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands