manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Operating Manual

Share
Download
Nordson EFD 2+2-XCH-V3 Operating Manual Download Page 74

High-Level Driver FB19 

FB19 serves to write a complete line/a channel to configuration data. Configuration messages are sequentially 
generated and transmitted via FB20 and FB15/FB16 to the PICO controller.
The line number is adapted to a value code. With value codes 10–16, the line number 100 is automatically used.

INPUT:

•  Command, channel, line (each as BYTE)
•  Dosing time/Pulse time as REAL
•  Pause time as REAL
•  Number of runs/Cycle Count as REAL
•  IN/Activation as REAL
•  Connecting line/Linkage as REAL
•  Connecting time/Delay as REAL
•  Block number/Block count as REAL
•  Dosing Value as REAL
•  Ext. puls as REAL
•  Container as REAL
•  Limit as REAL
•  Adjustable range as REAL
•  Temperature as REAL
•  Stop as REAL
•  Delay-Time as REAL

OUTPUT:

•  Command as BYTE (for FB20)
•  Channel as BYTE (for FB20)
•  Line as BYTE (for FB20)
•  CodeValue as INT (for FB20)

IN_OUT:

•  Start flag as BOOL (for externally triggering writing is lines)
•  Value as REAL (sending value)
•  Trigger_KD (connected with the FB20 trigger configuration data via DB15, serves as a trigger for sending and as a 

send confirmation for a configuration message)

PICO Controller 2+2-XCH-V3

74

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Summary of Contents for 2+2-XCH-V3





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands