![background image](http://html1.mh-extra.com/html/nordforest/46-217/46-217_operating-manual_1701459064.webp)
64
| 11.2019
Commissioning and operation
Rocker circular saw 46-217 and 46-218
Commissioning and operation
Activities before use
WARNING
Risk due to defects on the rocker circular saw
Incorrect installation, loosening of detachable connections or
material failures causes instability of the individual components and
can lead to severe injuries.
›
Only operate the rocker circular saw when the required compo-
nents have been checked.
›
Check the components after several uses.
Only operate the rocker circular saw when it has been installed properly
and the following components and your workplace have been checked:
• Connection cable intact,
• protective hood is firmly seated,
• saw blade and return spring are in perfect condition,
• rocker is in good working condition,
• screw connection is secure, particularly the one on the saw blade,
• main switch is in good working condition,
• workplace is tidy.
Switching the rocker circular saw on and off
WARNING
Risk of injury due to ejected wood residue!
If the protective hood is not adjusted correctly, wood residue may be
ejected from the rocker circular saw.
›
Ensure that the protective cover is in the closed protective position
when cutting.