![background image](http://html1.mh-extra.com/html/nordforest/46-217/46-217_operating-manual_1701459071.webp)
71
| 11.2019
Cleaning and maintenance
Rocker circular saw 46-217 and 46-218
ATTENTION
Damage to the rocker circular saw due to lack of maintenance!
If the prescribed maintenance measures are not observed, it can
cause damage to the rocker circular saw.
›
Observe the prescribed maintenance measures.
›
Clean the rocker circular saw off after every use.
Cleaning the rocker circular saw
ATTENTION
Damage to the rocker circular saw due to improper cleaning!
Improper cleaning and incorrect handling of the cleaning agents can
cause damage to the rocker circular saw.
›
Observe the usage information on the cleaning agent containers.
›
Do not use grease.
You must perform the following work after every use:
• Remove wood residue, small parts or sawdust with a brush or
vacuum cleaner.
• Clean all moving parts.
Do not spray the rocker circular saw with water otherwise it
may rust.
• Spray all moving parts with the multi-function spray.
Use WD-40 multi-function spray.
• Remove resin residue from the surface of the saw blade and rocker.
Resin can be removed with common agents for maintenance
and care.
i
i
i
EN