![background image](http://html1.mh-extra.com/html/nordforest/46-217/46-217_operating-manual_1701459077.webp)
77
| 11.2019
Faults
Rocker circular saw 46-217 and 46-218
Faults
WARNING
Danger when performing maintenance, servicing and cleaning
work during operation!
Injuries are possible.
›
Wait until the saw blade has come to a complete stop.
›
Switch off the rocker circular saw before performing maintenance,
servicing and cleaning work, and secure it against switching on
again.
Danger during maintenance, servicing and cleaning work due
to unqualified personnel!
Maintenance and cleaning which extends outside of the work
mentioned in this chapter may only be carried out in a service
workshop.
›
In this event, contact customer services.
If you are not able to repair the rocker circular saw yourself, contact
your dealer or an authorised repair workshop.
Before you contact your dealer, an authorised repair workshop
or the manufacturer, please note the specifications and the
machine number on the type plate. These details are required
for rectifying the problem or ordering spares.
The possible faults, causes and remedies are listed in the table below.
Observe the safety regulations for all set-up, cleaning, maintenance
and repair work.
i
EN