![background image](http://html1.mh-extra.com/html/nordforest/46-217/46-217_operating-manual_1701459063.webp)
63
| 11.2019
Assembly
Rocker circular saw 46-217 and 46-218
Connect the electrical system
DANGER
Risk of death due to electric shock!
There is a risk of electric shock due to defective plugs, connection
cables or a defect on live parts.
›
Never touch damaged plugs, connection cables or open electrical
components.
›
Only use the connection lines provided for operation.
›
Electrical work may only be carried out by electricians.
›
Damaged plugs, connection cables or housing must be repaired
by an electrician before the next operation.
ATTENTION
Damage to devices due to incorrect mains voltage!
Voltages which are too high can cause irreversible damage to the
rocker circular saw.
›
Make sure that the permitted voltage is
not
exceeded.
›
Use a ground fault circuit breaker.
Variant 46-217/230 V
›
Connect the protective contact plug to the corresponding socket.
Variant 46-218/400 V
›
Connect the CEE plug to the corresponding socket.
Ensure the phased turner is positioned correctly and adjust it if
necessary with a screwdriver.
If the circular saw blade does not run in the direction of the
user, the phase inverter must be switched.
Fig. 10:
Electrical
connection
i
EN