![background image](http://html1.mh-extra.com/html/nordforest/46-217/46-217_operating-manual_1701459067.webp)
67
| 11.2019
Commissioning and operation
Rocker circular saw 46-217 and 46-218
CAUTION
Danger due to recoil!
Blunt saw blades increase the risk of recoil and stress the motor.
›
Only use high-quality saw blades, e.g. made of chrome vanadium
steel.
›
Only use sharp saw blades.
›
Do not use cracked saw blades or saw blades with altered forms.
›
Only use operating equipment permitted for use with the rocker
circular saw.
›
Do
not
cut a wood piece without a return spring or with
a defective return spring.
Risk of injuries to the hands/fingers!
Removing cutting residue, small parts and sawdust with the hands or
fingers can lead to injuries.
›
Wait until the saw blade has come to a complete stop.
›
Do
not
remove wood residue, small parts or sawdust with your
bare hands.
›
Wear personal protective equipment.
›
Use a brush or a vacuum cleaner.
Risk of crushing by the rocker!
Hands and fingers can be crushed on the rocker during back and
forth movements.
›
Operate the rocker circular saw with both hands.
›
Wear personal protective equipment.
Danger due to prohibited operation!
Persons who perform prohibited operations with the rocker circular
saw may injure themselves.
›
Always switch the rocker circular saw off if you are leaving the
immediate vicinity.
›
Never
leave the rocker circular saw unattended.
EN