Nord Drivesystems NORDAC FLEX SK 205E Series, Brief Instructions

Page: 15 / 100

1 General
BU 0240 en-US-4920 15
Pos: 38 /Anl eitungen/Elektronik/FU und Starter/1. Allgemei nes/Sicherheits- und Installati onshi nweise und War n- Gefahr enhinw eise/neu/W arn- und Gefahr enhinw eise_01 [alle Geräte] @ 12\m od_1466692721681_14638.docx @ 332655 @ 2 @ 1
1.4 Warnings and hazard information
Pos: 39 /Anl eitungen/Elektronik/FU und Starter/1. Allgemei nes/Sicherheits- und Installati onshi nweise und War n- Gefahr enhinw eise/neu/W arn- und Gefahr enhinw eise_02 [alle Geräte] @ 12\m od_1466692799540_14638.docx @ 332690 @ @ 1
Under certain circumstances, hazardous situations may occur in association with the variable
frequency drive. Clear warnings and hazard information can be found in a suitable place on the
product and in the relevant documentation to draw your attention explicitly to possible hazardous
situations.
Pos: 40 /Anl eitungen/Elektronik/FU und Starter/1. Allgemei nes/Sicherheits- und Installati onshi nweise und War n- Gefahr enhinw eise/neu/W arn- und Gefahr enhinw eise am Pr odukt [alle dezentralen Geräte] @ 19\mod_1506083521514_14638.docx @ 2366219 @ 3 @ 1
1.4.1 Warnings and hazard information on the product
The following warnings and hazard information are used on the product.
Symbol Supplement to
symbol
1)
Meaning
DANGER
Device is live > 5
min after
disconnecting
line voltage
Danger Electric shock
The device contains powerful capacitors. Because of this, there may still be
hazardous voltage for more than 5 minutes after disconnecting the main power
supply.
Before starting work on the device, check that all power contacts are de-
energized by means of suitable measuring equipment.
It is essential to read the manual in order to prevent hazards!
CAUTION Hot surfaces
The heat sink and all other metal components as well as the surfaces of plug
connectors may heat up to temperatures in excess of 70°C.
• Risk of injury due to local burns on contact.
• Heat damage to adjacent objects
Allow sufficient cooling time before starting work on the device. Check the
surface temperatures with suitable measuring equipment. Maintain an
adequate distance to adjacent components or provide protection against
contact.
NOTICE
EDS
The device contains electrostatically sensitive components which can be easily
damaged by incorrect handling.
Avoid all contact (indirect contact through tools or the like, or direct contact)
with PCBs and their components.
1) Text is written in English.
Table 4: Warnings and hazard information on the product
Pos: 41 /Allgem ein/Allgem eing ültige M odul e/---------Seitenum bruch kom pakt --------- @ 13\mod_1476369695906_0.docx @ 2265496 @ @ 1