53
List Tools Requiring Recalibration
Tools requiring re-calibration will be preceded by a warning symbol in the left hand window (pane).
This symbol will only appear if the Recalibration Frequency has been specified in the
Calibration Options
settings and the last time the Tool was calibrated is less than the number specified on
Warn on
recalibration required at
within the
Calibration Options
.
1. Select the
Calibration
menu then select
List Tools requiring Recalibration.
2. Select the tool in the right hand pane as shown below.
3. Either right click to show the drop down menu then choose
Select
or double left click to find the tool in
the left pane.
TIP: The
symbol disappears when a certificate is generated from Calibration Data.
4. If a recalibration period has been defined and some tools require recalibration you will see the following
message when starting TDMS.
Click
OK
to continue
Summary of Contents for T-Box 43236
Page 2: ......
Page 47: ...45 4 Select Yes No or Cancel...
