36
TARGETS
A Target is a Torque value which has an upper and lower limit.
To obtain SPC data on a Work ID (i.e. USE), a Target must be in use when the test results are being taken.
1. Select the
Define
menu then select
Targets
(or select ).
The targets are shown in the right hand pane.
NOTE: To Modify or Delete a Target, you need to right click on the required Target.
2. Right click on a target to show the drop down menu. Options include Add, Modify, Delete, etc.
Summary of Contents for T-Box 43236
Page 2: ......
Page 47: ...45 4 Select Yes No or Cancel...
