12
2. Plug USB host cable (part no 39483 supplied with T-Box XL™) between USB Type B connector on the
back of the T-Box XL™ and the USB Type A connector on a PC
Before T-Box XL™ is connected, the bottom left of the TDMS window will show:
3. Switch on T-Box XL™. Refer to T-Box XL™ operators manual.
It is recommended to use the T-Box XL™ on mains power.
4. Wait until T-Box XL™ is displaying the Measure screen.
5. Wait for the connection message to appear on the T-Box XL™ display.
6. When TDMS connects to a T-Box XL™, the bottom left of the TDMS window will show:
When successfully connected, the following will be shown.
NOTE:
No calibration data, graphs, tests will be shown if none have been performed on the
T-Box XL™ connected.
When you connect and synchronise T-Box XL™ for the 1
st
time, TDMS creates an ‘unknown’
department. Rename as required.
USB Type B connector
Summary of Contents for T-Box 43236
Page 2: ......
Page 47: ...45 4 Select Yes No or Cancel...
