22
4.7.2
Valve Mounting
1.
On a clean surface remove all plastic plugs
from the NORAC hydraulic Valve (
V01
).
2.
Install the 6MB-6MOR fittings (
F05
) on the
"P" and "T" ports and tighten to 18 ft-lbs.
3.
Install the 4MOR-4MB (
F06
) into the "S"
port and tighten to 11 ft-lbs.
Figure 27 – NORAC Valve Block
4.
Install two orifices (
F08
) into the "B" ports
with the notch facing outward
as shown
in
Figure 28
.
5.
Install the remaining orifices (
F08
) into the
"A" ports
with the notch facing inward
as shown in
Figure 28
.
6.
Install the 6MB-4MOR fittings (
F07
) into the
"A" and "B" ports and tighten to 18 ft-lbs.
Figure 28 – Valve Block Assembly
7.
Insert the 0.047” orifice (
F07A
) into the “B”
port of the 3
rd
station of the block with the
notch facing in (
Figure 29
).
8.
Insert the 0.042” orifice (
F07B
) into the “A”
port of the 3
rd
station of the block with the
notch facing in (
Figure 29
).
9.
Mount the 6MB-4MOR fittings (
F12
) into
the “A” and “B” ports on the NORAC 3
rd
station block.
Figure 29 - Orifice Orientation
Summary of Contents for UC4+
