manualshive.com logo in svg

Nokia Mobile Phones NSE-5 Series, Service Manual, Page: 9 / 327

Share
Download
Nokia Mobile Phones NSE-5 Series Service Manual Download Page 9

PAMS

Technical Documentation

NSE–5

General  Information

Page 1 – 5

Issue 1 07/99

Introduction

This chapter contains details of the technical specifications for the
Transceiver, general technical information and a list of products/modules
together with their associated order codes.

NSE–5 is a handheld cellular phones for the pan–European GSM network.
It has a dualband GSM/DCS1800 transceiver, providing 15 power levels with
a maximum output power of 2W in GSM (Class 4).  It also has 16 power levels

with a maximum output power of 1W in DCS1800 (Class 1).

The basic handportable package offers the user a standard battery pack and
travel charger for charging from mains.  Accessories and other options are

listed in this chapter also.

Figure 1.

Phone shown with slide open and closed

Summary of Contents for NSE-5 Series








































































































































































































































































































































Reviews:

No comments