manualshive.com logo in svg

Nokia Mobile Phones NSE-5 Series, Service Manual, Page: 178 / 327

Share
Download
Nokia Mobile Phones NSE-5 Series Service Manual Download Page 178

PAMS

Technical Documentation

NSE–5

Service Software Instructions

Page  78

Issue 1 07/99

Flash Phone... command

A full set of flash programming boxes and a service battery or the Point Of
Sale flash adapter is needed together with the MCU software package
including the NSE–5.INI file is needed to perform a flash programming of
the phone

Activation

Status Bar Text

Alt, S, F

Flash PPM; Reading from ME...

Flash Phone; Reading from ME...

This command is used for flashing new software into the phone. Function
opens the following Flash Phone dialog box. When flashing is started,
waiting windows is showed which tells the user approximated flashing
time.

Dialog mode: modal

Flash dialog has the following items:

Market Area drop list (ALT+M):

Allows the user to select the market the phone is to be used in.

Summary of Contents for NSE-5 Series








































































































































































































































































































































Reviews:

No comments