manualshive.com logo in svg

Nokia Mobile Phones NSE-5 Series, Service Manual, Page: 181 / 327

Share
Download
Nokia Mobile Phones NSE-5 Series Service Manual Download Page 181

PAMS

Technical Documentation

NSE–5

Service Software Instructions

Page  81

Issue 1 07/99

Dealer

The dealer sub menu offers functions for ME settings for dealers.

User Settings... command

Activation

Status Bar Text

Alt, D, U

User Settings and Values; Reading from ME...

This command is used to edit user settings.

When activating this function the user is prompted if he wants to read the
user settings and values stored in the phone.

Dialog mode: modal

User Settings dialog box has following items:

Save File... button (ALT+S):

User can save user settings to file.

Load File button (ALT+L):

User can load user settings from file.

Edit... button (ALT+D):

Start Windows Paintbrush to edit loaded or saved graphical Wake up
message.

Preview picture:

Shows graphical Wake up message.

Summary of Contents for NSE-5 Series








































































































































































































































































































































Reviews:

No comments