manualshive.com logo in svg

Nokia Mobile Phones NSE-5 Series, Service Manual, Page: 165 / 327

Share
Download
Nokia Mobile Phones NSE-5 Series Service Manual Download Page 165

PAMS

Technical Documentation

NSE–5

Service Software Instructions

Page  65

Issue 1 07/99

Dialog mode: modal

Test of vibrator dialog has following items:

Vibrator is currently status text:

Displays the current status of the vibrator. Possible statuses are:

 -

Activated

 -

Deactivated

Activate button (ALT+A):

Activates the vibrator.

Deactivate button (ALT+D):

Deactivates the vibrator.

Close button (ESC):

Deactivates the vibrator, set the phone in normal mode and closes the
dialog.

Help button (ALT+H):

Context sensitive help.

User Interface... command

Activation

Status Bar Text

Alt, E,T

User Interface Test; Set test on

Command is used for making display tests in Display Tests dialog.

Dialog mode: modal

Display Tests dialog has following items:

1. Test Pattern radio button (ALT+1):

In test display 1  the display is filled with chessboard letters.

2. Test Pattern radio button (ALT+2):

In test display 2 the display is filled with inverse chessboard letters.

Summary of Contents for NSE-5 Series








































































































































































































































































































































Reviews:

No comments