manualshive.com logo in svg

Nokia Mobile Phones NSE-5 Series, Service Manual, Page: 290 / 327

Share
Download
Nokia Mobile Phones NSE-5 Series Service Manual Download Page 290

PAMS

Technical Documentation

NS*–3/5

Non Serviceable Accessories

Page  10

Issue 1 07/99

Fast Travel Charger ACP–9

Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Fast
Travel Charger is practically current independent in normal office and house-
hold use. Like the standard charger, it is compatible with all battery options
and is available for different wall sockets.

The Fast Travel Charger can also be used with basic stand and desktop
stand.

ACP–9U

ACP–9X

ACP–9A

ACP–9E

Product Codes

Fast Travel Charger

 (Euro plug) 90–264 Vac

ACP–9E 0675149

Fast Travel Charger

 (US plug) 90–264 Vac

ACP–9U 0675151

Fast Travel Charger

 (UK plug) 90–264 Vac

ACP–9X 0675150

Fast Travel Charger

 (Australia) 90–264 Vac

ACP–9A 0675152

Output cable PCC–1 

(supplied with ACP–9): 

0730076

Specification

Output connectors:

3.5 mm DC plug, 3–pole (+, –, control)

Protection:

output current limiting, max. 850 mA
output voltage limiting, max. 9.3 V (unloaded)

Output voltage/current (typ):

8.4 V / 800 mA

Summary of Contents for NSE-5 Series








































































































































































































































































































































Reviews:

No comments