Nokia Mobile Phones NSE-5 Series, Service Manual, Page: 130 / 327

PAMS
Technical Documentation
NSE–5
Service Software Instructions
Page 30
Issue 1 07/99
NSE–5 Features
Product
New command
Activation Status Bar Text
Alt, P, N Scanning for product...
Ctrl+R
If phone is changed (with same phone type only serial number is
changed) phone will be initialised to normal mode. If phone is changed to
different phone type the current DLLs are unloaded and new ones are
loaded for that phone.
If the Quick/RF Info view is open, window will be automatically updated. If
Phone Information view is open, it will be automatically updated.
Open... command
Activation Status Bar Text
Alt, P, O Changing product support modules
Phone is set to normal mode.
Initialise... command
Activation Status Bar Text
Alt, P, I
Opens a submenu
Normal Mode
Activation Status Bar Text
Alt, P, N Initialising normal mode..,
F5
When normal mode has been activated or program has been started,
self–test results will be asked from MCU. If any fault was found in the
tests, an error message is shown. If normal mode has been set
successfully (no self test error has been found), and paging listening has
been started, the used AFC value is requested from MS. Initialisation
routine checks phone’s cellular type and if unsupported phone is detected,
application unloads the DLLs.