OPERATION
Falcon
t
Ultra B (07--05)
9
MACHINE OPERATION
FOR SAFETY: Do not operate machine, unless
operation manual is read and understood.
WARNING: Fire Or Explosion Hazard. Never
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
PRE--OPERATION CHECKS
-
Vacuum floor and remove any debris.
-
Check battery meter charge level to ensure
batteries are fully charged (See BATTERY
CHARGING)
.
-
Check that spray bar is installed.
-
Check that inline strainer filter is installed.
-
Inspect spray tips for proper spray pattern
(See DAILY MAINTENANCE)
.
1. Turn on main switch.
2. Lower brush/pick-up head to floor by depressing
brush height switch (Figure 6).
FIG. 6
3. Turn on vacuum and pump switches.
NOTE:
The brush and pump will start once control
grips are rotated.
4. Before you begin cleaning, turn speed control
knob to slowest speed (Figure 7).
FIG. 7
5. To begin cleaning, rotate control grips completely
forward and gradually turn speed control knob to
desired cleaning speed (Figure 7).
For optimum cleaning results, operate at a
cleaning speed of 15 m (50 ft) per minute for deep
cleaning and 30 m (100 ft) per minute for interim
cleaning.
WARNING: Fire Or Explosion Hazard. Do Not
Pick Up Flammable Materials Or Reactive Metals.
6. To stop machine, release control grips.
7. To operate machine in reverse, simply pull reverse
switch backwards one speed (Figure 8).
FIG. 8
8. After cleaning carpets, allow sufficient time for
carpet to dry. Use a carpet blower to reduce drying
time.
