Use and Maintenance Manual model “H17 V LIGHT”
27
ENGLISH
ENGLISH
11.3 H
2
O STANDBY
“H
2
O Standby” mode is activated when water tem-
perature reaches 85°C; this function takes over to
protect the circuit, especially when no COMFORT
CLIMA function is activated for the boiler H
2
O. The
appliance will restart automatically after cooling
down, provided that a power-on request is set. (i.e.:
room temperature request).
11.4 VENTILATION MANAGEMENT
(if applicable)
The products in the range equipped with a ventilation
system can heat the environment where they are
installed not only by means of the heat generated
through the glass, but also through their specific fan.
OPERATING PROCEDURE:
MENU >> USER SETTINGS >> VENTILATION
Access the menu by pressing
Scroll down entries to select USER SETTINGS using
Access the menu by pressing
Press on “VENTILATION” (first menu entry)
The screen with the ventilation adjustments will
appear as shown in the figure below.
OK
OK
OK
OK
Confirm by pressing button.
To go back to the STAND-BY screen, press the
button repeatedly.
Change ventilation power by pressing
0 – ventilation deactivated;
1-7 – ventilation power range
Upon request to your technician, ventilation can be
thermostated so as to turn it off - once the
temperature in the room where the product is in-
stalled has been reached - by means of the remote
control and using only an external thermostat for the
device environmental management.
12 DESCRIPTION OF THE MENU FUNCTIONS
This chapter describes the user menu functions useful
to improve some comfort-related aspects of the user
and/or operation of the product.
12.1 THERMOSTAT WITH TIMER FUNCTION
With the chronothermostat, you can:
program, for each day of the week, automatic switch
on and off of the product, with 4 independent time
intervals (PROGRAM 1 - 2 - 3 - 4).
The steps to follow are outlined below, starting with
the STAND-BY screen, to access the relevant menu.
OPERATING PROCEDURE:
MENU >> USER>> THERMOSTAT TIMER
Access the menu by pressing key
Scroll the entries to SET USER, key
Access the menu by pressing key
Scroll the entries to THERMOSTAT TIMER, key
Access the function with the key
The screen with activation of the function and the
possibility of selecting 4 TIMED setting programs, will
appear as illustrated in the figure below.
OK
OK
OK
Enable/disable the function with the key (to
tick/untick it) and:
• Return to SET
USER with the key .
OR
• Pass, using the key , to the choice of
program to set, before accessing with the
key to change it.
If you want to access 1 of the 4 programs, the
screen will appear as shown in the image below:
OK
OK
