Use and Maintenance Manual model “H17 V LIGHT”
25
ENGLISH
ENGLISH
10.5 SWITCHING ON/OFF THE PRODUCT
11.2 COMFORT CLIMA FUNCTION
As described in the “saving mode” paragraph, the
appliance is intended to meet the user’s heating
requirements. The function which can be enabled,
linked to his mode, also ensures - if the home has a
good energy class - fuel saving through intelligent
switch off of the product (once values are reached
as per settings).
Please find below the procedure to be followed in
order to enable the function, as well as a list of values
and their pertaining meaning, as well as a practical
example.
Each time the appliance is turned on, it ALWAYS
turns on at maximum power to guarantee the
greatest amount of heat to the heating system.
To switch on the product, long press key until the
following screen appears, followed by an acoustic
signal.
This screen will be displayed for the following ma-
chine statuses;
SWITCH ON
•
Pellet loading initial phase;
WAITING FLAME
•
Flame development waiting
phase;
FLAME PHASE
•
Flame and oxidizer stabilization
phase inside the brazier;
The screen is accompanied by the “flame” symbol
with the writing ON, without displaying the power level.
To switch off the product, long press key .
The operation will be followed by acoustic signal and
any alarms will be reset.
For models equipped with an automatic cleaner,
during the switch on phase, the product activates
a brazier cleaning phase before switching on. In the
event of FAILED IGNITION, after pressing the button,
a POP UP will signal the need to suck the pellet from
the brazier before turning the appliance back on,
thus avoiding discharge of unburned pellets into the
ash drawer.
During the first start-up of the product, either un
-
pleasant odours or smoke caused by evaporation
or drying of certain materials used may occur. This
phenomena will disappear after some hours of use.
During this period, you are advised to keep the
premises well ventilated.
Always vacuum the brazier using an ash cleaner,
FIRE HAZARD.
11 OPERATION
Products in the range include an operation phase
with 2 operating powers. Once the room-tempera-
ture values - if set - are reached, the appliance will
behave as follows.
11.1 SAVING MODE
SAVING mode screen when desired room
temperature is reached:
SAVING mode screen when desired Boiler water set-
tingS are reached:
SAVING mode screen with both settings reached:
During operation, the appliance operates so as to
reach room-temperature and boiler-water values
as they have been set by the User; once such con-
ditions are fulfilled, power will be decreased until
SAVING mode is enabled, a phase in which fuel con-
sumption is at its lowest.
