Use and Maintenance Manual model “H17 V LIGHT”
10
ENGLISH
3.7 DOCUMENTS TO BE ISSUED
3.8
UNPACKING THE PRODUCT
Packaging is composed of boxes in recyclable card-
board complying with RESY standards and wooden pal-
lets. All packaging materials can be re-used for similar
use or, if necessary, disposed of as urban waste, in com-
pliance with current laws.
Remove the strap binding the pallet to the packaging
and lift the cardboard
Fig.1
; remove the plastic bag
around the product, making sure it is intact.
The body must always be handled with a trolley, paying
attention to keep it in a vertical position.
Make sure both the door and its glass are protected
against mechanical impact which would compromise
their integrity.
If possible, unpack the product near the area where it
will be installed.
To release the appliance from the pallet, you can un-
screw the two screws placed under the pallet (13 hex
key).
Fig.2
Position the equipment and proceed connetìcting it to
the chimney flue.
By using the 4 adjustment feet, find the right level so
that the smoke discharge and the pipe are connected
correctly.
Once the installation has been carried out, the tech-
nician must provide to the user with the following:
•
use and maintenance booklet of the appliance
supplied by the manufacturer;
•
technical documents of all the accessories
used and subject to maintenance;
•
documents related to the exhaust system;
•
system booklet (when applicable);
• installation certificate;
Documentation useful for liability purposes
of the installer must include:
•
a detailed description (also including photo-
graphs) of the presence of other heat generators;
•
Declaration of Conformity of the system (M.D. 37/08);
•
general description, diagram or photographic
documentation of changes made to the system, if
any intervention is necessary during installation;
• Use of certified material with the CE mark
(305/2011);
•
possible instructions related to the warranty;
•
date and signature of the installer;
NOBIS SRL cannot be held in any way liable in the
event of non-compliance with the installation and
start-up standards of its products.
Fig.1
Fig.2
