Use and Maintenance Manual model “H17 V LIGHT”
21
ENGLISH
ENGLISH
8
DESCRIPTION OF THE REMOTE CONTROL
8.2 DESCRIPTION OF THE REMOTE CONTROL KEYS
The remote control appear as in the image shown
below:
1
‘Increase’ key (selection key)
2
‘Decrease’ key (selection key)
3
ON/OFF or reset from “Sleep” mode key
4
Display
5
‘MENU access’ and ‘Confirm’ key
6
Back to previous screen
When in “Sleep” mode, the screen of the remote
control is blacked out, only maintaining enabled, if
necessary, the remote communication with the ap-
pliance, to reduce battery consumption.
8.1 DESCRIPTION OF THE RECEIVER
1
Serial connection (to be used by authorized staff ONLY)
2
USB connection (to be used by authorized staff ONLY)
3
Emergency cable connection
4
GREEN LED - appliance working status
5
YELLOW LED - remote communication in progress
6
RED LED - alarm on
7
BLUE LED - System updating in progress
8
Appliance switch on/off button
9
Receiver - remote control pairing button
10
Manual upgrade button
(use by authorized staff ONLY)
Before connection using the emergency cable, remove
the batteries from the remote control. FIRE HAZARD
1
3
2
4 5
6 7
8
9
10
1
2
3
4
5
6
In the event of malfunctioning of the remote commu-
nication between the remote control and the receiver,
or if batteries are flat, please use the
emergency ca-
ble
supplied to restore communication between the
remote devices.
EMERGENCY CA-
BLE CONNECTION
3
Before switching on the appliance, it is recommended
to read the following chapter carefully (pertaining
the use of the receiver and the remote control, as
well as their related functions.
INFORMATION NOTE:
• frequency bands and transmitted power used by
the equipment, as reported in technical
documentation: 868.3MHz - 869.85MHz
• frequency bands and respective power limits
transmitted applicable to the device (frequency and
standardized power): 6dBm ERP
The appliance is equipped with an emergency remote
board, placed on the back of the product, which allows
to manage some basic functions in the event the remote
control is faulty or not working properly.
