NKT Photonics Koheras ADJUSTIK HP, Product Manual

Page: 60 / 115

Connecting the laser to a CONTROL PC
60
6
7 Using a CAT5 or better Ethernet cable, connect the laser’s Ethernet port either directly to a
CONTROL PC Ethernet port or to a subnet accessible by the PC.
8
Action
To delete or modify a configured port:
1 Highlight the port and Click the delete
button
- or -
2 Click the edit button
3 Click Save when finished. Edit button
Delete button
From the Connect drop down menu,
click on the Ethernet connection
configured in step 3 to connect
CONTROL to the laser.
Note: If CONTROL cannot access the
port configured for the laser, verify that
the CONTROL PC has connectivity with
the laser by executing a PING test.
Click the
connection