NKT Photonics Koheras ADJUSTIK HP, Product Manual

Page: 58 / 115

Connecting the laser to a CONTROL PC
58
Ethernet connection
To connect the laser to the PC using Ethernet, the PC and the laser must have
their Ethernet ports connected to the same or separate IPv4 subnets. If separate
subnets are used, they must be accessible to each other.
4 Launch the CONTROL software by either:
•
clicking on Windows – Start – Programs – NKT Photonics –CONTROL
– or –
•
double clicking the CONTROL shortcut on the desktop
5 The CONTROL window opens.
Click on the “Connect” button
in the left side of the window.
6 CONTROL automatically scans
for any connect lasers and
accessories available on both
COM and configured Ethernet
ports.
7 The CONTROL and STATUS
panels for the laser will open.
Note : If multiple lasers are
connected to the PC, click on
the specific lasers icon from
the Device Selector list to open
its CONTROL panels.
Action
2