8
included with the EBP:
●
EBP user's guide
NOTE Discard the EBP user's guide if you are installing the EBP with a new UPS at the same time. Use
the UPS user's guide to install both the UPS and the EBP.
Rackmount Installation
The Rackmount cabinet comes with all of the hardware required for installation in a standard
EIA or JIS seismic Rackmount configuration with square and round mounting holes. The rail
assemblies adjust to mount in 19” racks with a distance from front to rear around 70~76 cm
(27 to 30 inches) deep.
Checking the Rail Kit Accessories
（
Options
）
Verify that the following rail kit items are included for each cabinet:
Left rail assembly:
- Left rail
- Rear rail
- (3) M5_8 pan-head screws
Right rail assembly:
- Right rail
- Rear rail
-(3) M5_8 pan-head screws
Rail hardware kit:
- (8) M5 butterfly nuts
- (2) rear stop brackets
- (8) M5 umbrella nuts
Mounting bracket kit:
- (2) mounting brackets
- (8) M4_8 flat-head screws
Tools Required
To assemble the components, the following tools may be needed:
Philips (cross-head type) screwdriver
and 6 mm wrench or socket
Rackmount Setup
CAUTION
The
cabinet is heavy. Removing the cabinet from its carton requires a
minimum of two people.
If installing optional EBP, make sure to install the EBP directly below the UPS so
that all wiring between the cabinets is installed behind the front covers and
inaccessible to users.
NOTE
Mounting rails are required for each individual cabinet
