25
function-setting key
for more than half a second
(less than 2 seconds) at this time, the letters “bPS”
will stop flashing. The “ON”(or OFF) below the bPS
will flash. Press and hold the scroll key
for more
than half a second (less than 2 seconds) to determine
whether the BPS function is enabled or disabled.
③ Confirm the BPS selecting interface. After
selecting ON or OFF, press and hold the function
setting key
for more than half a second (less than 2
seconds). Now, the BPS setting function is completed
and the “ON” or “OFF” below the “bPS” will
light without flashing.
④ If you choose “OFF”, then go to step 7,
otherwise go ahead to step 5.
⑤ Set the BPS tolerance range. Short press the scroll
key
or for more than half a second (shorter than
2 seconds) to select the voltage range in percentage.
+5%,+10%,+15%,+25%(default is +25%)，then short
press function setting key
for more than half a
second (shorter than 2 seconds)to confirm the
selection, then to set the minus range
⑥ To set the minus range in the same way.
⑦ After the minus range is confirmed. Long press
function setting key
for more than 2 seconds to
exit setting menu.
Output voltage
setting (3)
① Enter the setting interface. Press and hold the
function setting key
for more than 2 seconds, then
come to setting interface, Press and hold the scroll
key
for more than half a second(less than 2
seconds), select the function setting, choose output
voltage setting interface, at the moment, the letters
“OPU” will flash.
② Enter the output voltage selecting interface.
Press and hold the function setting key
for more
than half a second(less than 2 seconds), then come
to setting interface of output voltage OPU, at this
time, the letters “OPU” will light for a long time.
The numerical value below the OPU will flash. Press
and hold the scroll key
for more than half a second
(less than 2 seconds), select the numerical value in
accordance with “OPU” function. The provided
voltages are 100v, 108v, 110v, 115v, 120v, you can
choose any one of them by yourself (The default is
110v).
③ Confirm the output voltage selecting interface.
After selecting numerical value, press and hold the
