eNCard-i User guide
64
NITGEN Co., Ltd. /
(Bangi-dong) 6 Wiryeseong-daero, Songpa-gu, Seoul, 138-827, Korea
Tel: 02-6488-3052, Fax: 02-6488-3098, E-Mail:[email protected]
3.8.2. Camera
If you select the [Display] -> [Camera] in the main menu, the following window appears.
▶
Default Setting: Same as the window on the left
▶
Display option
-
None ( no user picture is shown on result
window)
-
Current Picture ( current user picture is taken
and displayed on result window)
-
User Picture ( user database picture stored in
the user picture is displayed)
▶
Save success log
If it is checked (
), the camera image is captured as
image log when the authorization was successful.
▶
Save failed log
When it is checked (
), the camera image is captured as
image log when the authorization was failed.
Select the [OK] button to save the value or select [BACK] button to cancel and return.
3.8.2.1 Camera Flash Option
The camera used for still pictures or face detection also has an optional flash to use during
dark conditions. There is a built-in sensor to detect dark and light conditions. You can select
to turn off the flash if you do not need it.
Depending on the dark conditions you can set the flash to different levels of brightness.
1.
Low
2.
Medium
3.
High.
4.
Off/Not used
Delay (milliseconds) is programmable from 200ms to 2000ms. This can also be referred to as
exposure time. The amount of time required for the flash to turn on before taking the picture.
Depending on the environment the administrator may need to adjust this exposure period.
3.8.3. Language
