eNCard-i User guide
24
NITGEN Co., Ltd. /
(Bangi-dong) 6 Wiryeseong-daero, Songpa-gu, Seoul, 138-827, Korea
Tel: 02-6488-3052, Fax: 02-6488-3098, E-Mail:[email protected]
The
server
IP
and
network information will
be displayed. You can
now connect your card
reader terminal directly to
your PC. Setup your PC
network card with the
same Server IP and
Gateway settings.
After you successfully
connect with UNIS you
can change/delete the
administer
user
as
needed.
Method #2 (USB port is service port.)
Entering admin mode when you have lost the administrator ID
1) On USB device, create folder /CR/
2) On your PC create an empty file with no extension and name it ‘factory’
3) Copy ‘factory’ file from PC to USB /CR/ folder
4) Plug USB into the card reader
5) Card Reader tamper must be Open (Cover open and off)
6) Successful user must authenticate and open the door, during the door open period,
press the admin icon and it will bypass admin entry requirements.
3.1.5. How to save the set values
In each menu of the administrator mode, press the OK button to save changes. To
cancel and not save, press the [BACK] icon at the top left.
If there is no touch or key press the menu will timeout after 60 seconds of no activity.
