eNCard-i User guide
46
NITGEN Co., Ltd. /
(Bangi-dong) 6 Wiryeseong-daero, Songpa-gu, Seoul, 138-827, Korea
Tel: 02-6488-3052, Fax: 02-6488-3098, E-Mail:[email protected]
3.6. System
3.6.1. System
The following window appears if you select the [System] -> [System] in the main menu.
▶
User ID Length
The user ID length can be 2 to 8 digits in length. The user
ID length will be the length of the user ID required to
authenticate. The user ID length should be the same value
that is programmed in the server software. Any place that
requires the entry of a user ID will be restricted to the
length that is programmed in this area. This value should
reflect the amount of users in your terminal. For example, if
you have fewer than 100 users than enter 3. If your have
more than 10000 users, then program a 6 digit length
.
Note: When changing the ID length shorter than the
previous programmed value; be aware that an
administrator may not be authenticated properly to
enter administrator programming if their ID length
was longer than the current length. It is
recommended this value be changed at the time of
setting up the terminal, and not during regular
usage.
▶
Authentication
One of Four options is available for the authentication
mode. This setting determines where the user
authentication is done, in the server or locally at the
terminal, or both. Change this setting when there is high
network traffic, many users, or authentication is too slow.
The default setting is Terminal/Server
Terminal/Server – If the local terminal is properly
connected to the network server, the authentication is done
at the local terminal and the result is sent to the server in
real time. However, if the user ID entered does not exist in
the local terminal the authentication is requested at the
server.
Server/Terminal - If the local terminal is properly connected
to the network server, authentication is done in the server.
If there is a disconnection or communication trouble
between the server and terminal the authentication is done
at the terminal.
Server Only – The authentication is done only at the
network server.
Terminal Only – The authentication is done only at the
terminal.
▶
Job Code
When this option is checked and a registered user is
successfully authenticated, the user will be required to
enter a 2-8 digit code as the final step. This can be any
