eNCard-i User guide
61
NITGEN Co., Ltd. /
(Bangi-dong) 6 Wiryeseong-daero, Songpa-gu, Seoul, 138-827, Korea
Tel: 02-6488-3052, Fax: 02-6488-3098, E-Mail:[email protected]
3.7.6. Terminal External
If you select the [Terminal]->[External device] in the main menu, the following window
appears.
▶
Default Setting: Same as the window on the left.
See Installation Guide Section 11 for connecting a
serial printer.
▶
Printer Option
Disabled
–
select this if not using
T/A Ticket – if using Time and Attendance mode and
require a printout every time authorization occurs.
Meal Ticket – if using Meal Mode and require a printout
every time authorization occurs.
The printing format differs as per each setting. The final
result (time/date, mode type, etc) will be printed.
The printer used must be only SRP-350 serial type model.
See Installation Guide Section 12 for connecting an
RS485 bus.
▶
RS485 Option
Disable – select this if not using
LC010/BLC – Select this when using Virdi LC010 or BLC015
external lock controller.
Controller – Select this when using OSDP protocol to an
external controller.
▶
RS485 Option
If ‘controller’ is selected for the RS485 Option, a RS485 is
required to connect to a RS485 protocol bus. You should
select an appropriate id from 0-7,.
Controller selection will work with a standard protocol
called ‘OSDP’; this is a SIA Industry standard protocol.
