31
Syst
em C
onfigur
ation
In
ternet S
ettings
Setup using Wi-Fi Protected Setup
Setup is easy if you use a wireless router that includes the Wi-Fi Protected Setup feature. Read the instruction manual for your router
for additional information on using this feature.
NOTE:
You will not be able to configure an access point using Wi-Fi Protected Setup if its security type is set to WEP. See the table
on page 30 for more information on security encryption methods.
If you are using the guided setup Tutorial, proceed to step 2.
1
Tap
to begin configuration.
2
Tap the connection method that matches your router.
3
On your Wi-Fi Protected Setup compatible router, you will have either one of the following options:
NOTE:
It may take up to two minutes to complete the connection.
Push-Button Connection
Hold down the Wi-Fi Protected Setup button on the access point until the
corresponding light flashes.
OR
PIN Connection
Use the number displayed on the New Nintendo 2DS XL screen to
configure your router, then tap
Next
.
Wi-Fi Protected Setup
button
4
When a Settings Complete screen appears on your system, tap OK to run a connection test. If
the connection test succeeds, setup is complete.
NOTE:
The connection test may fail if you try to connect immediately after finishing setup. Wait one or two minutes before trying
the connection test.
