Nikon NPL-322, Instruction Manual

Page: 58 / 197

3 Getting Started
44 Total Station NPL-322 Instruction Manual
Entering a new point
When you input a new point name or number, a
coordinate input screen appears. Enter the point’s
coordinates in NE, NEZ, or elevation-only (Z) format.
Press
[ENT]
on the last line (the CD field) to store the
point in the current job.
Pressing
[ENT]
without a point name
To use a point without recording the coordinates, press
[ENT]
in a PT field, without entering a point name.
The input coordinates are used in the calculation. They
are not saved in the database.
Specifying a wildcard (*)
If you include an asterisk (*) when you enter a point or
code name, a list of points that match the entered text
appears.
Use
[^]
or
[v]
to move the cursor to the point that you
want to use. Then press
[ENT]
.
If the Page Up or Page Down icons are displayed,
use
[<]
or
[>]
to page up or page down the list.
When you select a point from the list, its coordinates
are displayed and a beep sounds.