Nikon NPL-322, Instruction Manual

Page: 47 / 197

Total Station NPL-322 Instruction Manual 33
Getting Started 3
EDM measurement status
When you are taking measurements, the EDM measurement status shows the mode
that is being used.
When you display observation data, the EDM measurement status shows the mode
that was used when the data was collected:
If there is no icon, Prism mode is being used.
Battery indicator
The battery indicator shows the battery voltage level:
If the battery level is critically low, the following
message appears:
Turn on/off the Backlight, Laser pointer, and Sound
LCD backlight
To turn the LCD backlight on or off, press the illumination key . In case the LCD
is too dark or bright, it is possible to adjust the backlight level through the Contrast
adjustment window (by holding down the illumination key (bulb-icon) for one second
and pressing [<]/[>]; see
page 34 ).
3-switch window
Use the 3-switch window to turn on/off the backlight
of the display, laser pointer and beep-sound on the
instrument.
To open the 3-switch window from any screen, hold
down the illumination key for one second.
To cycle through the settings for a switch, press the number beside that switch. For
example, to turn the backlight on or off, press
[1]
.
Reflectorless mode
Level 4 (Full)
Level 3
Level 2
Level 1
Battery low