Nidek Medical LM-1800P, Interface Manual

Page: 92 / 118

88
LAN COMMUNICATION
:
Confirmation and Setting of Receiver Computer
MLM26*RTZ002F
6.3 Confirmation and Setting of Receiver Computer
6.3.1 Reception structure of measurement data
The measurement data transmitted from the LM-1800P/LM-1800PD is captured by the receiver com-
puter as shown in the illustration below.
The measurement data transmitted via LAN are written to the shared folder set on the receiver com-
puter. Then, it is extracted by filing software such as NAVIS, and saved in the database.
6.3.2 Setting up the shared folder
Set up a shared folder to save the measurement data transmitted from the LM-1800P/LM-1800PD.
The shared folder (folder path) set up here is set in the parameter of the device and software (such as
NAVIS) of the receiver computer.
L M X
Transmission of measurement
data from the device via LAN
Receiver computer
Filing software (NAVIS etc.)
Database
Shared folder
Measurement data
Extraction and storage of
measurement data
• Do not set up a shared folder on an external storage such as an external hard disk.
• Be sure that a folder with the same name does not exist.
The device cannot discern the folder and measurement data cannot be transmitted properly.
ex.) “C:\TEMP\DATA” and “C:\ProgramFiles\DATA”: Folder name “DATA” is common.
Change the name of either folder to such as “C:\TEMP\ARK” to avoid repeated folder name.
* This applies only when creating a shared folder.