Nidek Medical LM-1800P, Interface Manual

Page: 100 / 118

96
LAN COMMUNICATION
:
Data Format
MLM26*RTZ002F
6.4 Data Format
The data format varies depending on the setting (NIDEK_V1.00 or NIDEK_V1.01) of the File format
parameter.
6.4.1 Folder configuration
The transmitted data is saved either in the shared folder, or its subfolder.
If data has not been incorporated into the receiver software, check whether data is written in any folder
below including the device error code.
Even when the transmitted measurement data is incorporated properly, the data cannot be
checked if it is erased by the receiver software.
6.4.2 Output file of measurement data
There is one type of output file normally produced: measurement data.
When no style sheet file is found in the LM folder, a style sheet file is also output.When the style sheet
file already exists, a new file is not output
.
 File name
The file names of the measurement data transmitted from the device to the receiver computer are as fol-
lows:
The ID characters that cannot be used for file names are all converted to tilde (
∼
).
NIDEK_V1.00
The network communication is performed according to the NIDEK V1.00
specifications.
NIDEK_V1.01
The network communication is performed according to the NIDEK V1.01
specifications.
LM
Shared folder
Measurement data
(XML file)
Measurement data
(XML file)
Subfolder
Subfolder
Subfolder
Measurement data
One file for each measurement
All data is output to one XML file.