Nidek Medical LE-700, Installation Manual

Page: 66 / 80

60
CHECK AND ADJUSTMENT PROCEDURES: Polish Size Check and Adjustment
9
Specify the polishing conditions.
1)
Set each item as follows:
•
For flat edge polishing
“Material”
→ CR39
“Type” → Single
“Frame” → Flat
“Soft” → None
“Polish” → Exec
“Layout” → Passive
“FC” → None
•
For bevel polishing
“Material”
→ CR39
“Type” → Single
“Frame” → Metal
“Bevel position” → Auto
“Soft” → None
“Polish” → Exec
“Layout” → Passive
“FC” → None
2)
Press .
The layout screen appears.
10
Continue the processing method on the layout screen using the same procedures
explained by the following steps starting from size setting.

“3.5.1 Size check” (page 27) - (Step 5) to (Step 10)
11
Measure the outer diameter of the processed lens to confirm the value is within the
following tolerance.

“3.11.1 Polish size check” (page 56) - (Step 6)
12
Repeat (Step 1) to (Step 11) until the outer diameter is within the tolerance of
φ 45.0±0.1 mm.