49
CHECK AND ADJUSTMENT PROCEDURES: Polished Bevel Position Check and Adjustment
1)
When some of the rear surface of the bevel is
unpolished, decrease the value of “Bevel posi-
tion (Pol)”. When some of the rear surface is
burnt, increase the value.
2)
When some of the front surface of the bevel is
unpolished, increase the value of “Bevel posi-
tion (Pol)”. When some of the front surface is
burnt, decrease the value.
6
Enter a value with the numeric keypad and press
.
7
Press the “Maintenance” tab.
The maintenance screen appears.
8
Press Circle 45
.
The processing condition screen appears.
9
Specify the bevel polishing conditions.
1)
Set each item as follows:
“Material”
→
CR39
“Type”
→
Single
“Frame”
→
Metal
“Bevel position”
→
Auto
“Soft”
→
None
“Polish”
→
Exec
“Layout”
→
Passive
“FC”
→
None
2)
Press .
The layout screen appears.
Unpolished or burnt lens surface
Lens rear
surface
Lens front
surface
Unpolished or burnt lens surface
Lens rear
surface
Lens front
surface
