26
CHECK AND ADJUSTMENT PROCEDURES: Surface Measurement (LMU) Calibration
7
Press the “Start” button.
Start calibration.
During calibration, the yellow dot on the “Start” button
lights up.
8
When calibration is finished, press
while holding the jig by hand and remove it.
9
Press Circle 45
.
The processing condition screen appears.
10
Specify the flat edging conditions.
1)
Set each item as follows:
“Material”
→
CR39
“Type”
→
Single
“Frame”
→
Flat
“Soft”
→
None
“Polish”
→
None
“Layout”
→
Passive
“FC”
→
None
2)
Press
.
The layout screen appears.
11
Continue the processing and checking procedures on the layout screen using the
same procedures explained by the following steps starting from size setting.
to
Yellow dot
