44
CHECK AND ADJUSTMENT PROCEDURES: Size Check and Adjustment
3.8.2
Polishing adjustment
1
Enter service mode from the LE-700 home screen.
“3.2.1 Entering service mode” (page 20)
2
Press the “Grinding” tab.
3
Press Tab 5.
Scroll down the scroll bar.
4
Press the numeric fields of “CR39, Bevel”
and “CR39, Flat” next to “Polish differential”.
The numeric keypad appears.
1)
Enter a value with the numeric keypad and
change the parameter value.
When the lens edge is left unpolished: Increase the
parameter value by 0.05.
When the lens edge is burnt: Decrease the param-
eter value by 0.05.
2)
Press .
5
Press the “Maintenance” tab.
The maintenance screen appears.
